TPXMX002 日本三井化学

tpxmx002 日本三井化学 注塑，挤出或吹塑成型

the characteristics of pmp plastic materials provided by huayunplastic materials co., ltd

(high temperature resistance, clear and transparent, highmelting point, chemical resistance, acid resistance, alcoholresistance, impact resistance)

(1) comparison at high temperature: fairly high elongation atbreak, impact strength, superior creep resistance (high rigidity);a. higher than pp above 100 ℃;

b. it can be used for one year at 130 ℃;

c. more than 150 ℃ than pc;

d. it can be used for 100 hours at 180 ℃.

2. electrical insulation: (no polar group in tpx molecule)

a. dielectric strength: 65kv / mm (better than ptfe andpropylene);

b. dielectric constant: 2.12 (ptfe dielectric constant:2.0-2.1);

3. chemical resistance: acid, alkali and edible oil; (very lowwater absorption: high resistance to water and steam)

4. health and safety: non toxic, in line with the fdacertification;

application of pmp plastic materials:

1. beaker, culture dish and incubator (transparency, chemicalresistance, water permeability and gas permeability);

cosmetic containers, caps (essence), which do not have any smellof plastic, will not interfere with the original aroma.

3. microwave oven lunch boxes and food containers (non-toxic,good temperature resistance, non microwave absorption);

4. electronic and electrical parts, led mouldings and coveredcables (insulation and extrusion grade);

5. medical devices: endoscope tube and syringe (sanitary);

⒍ oven appliances (high temperature);

⒎ film (extrusion grade)