电力电缆 YJV22-3*6+1*4 YJV22-3*6+2*4 YJV22-4*6+1*4

品牌银顺型号yjv22-3*6+1*4 yjv22-3*6+2*4 yjv22-4*6+1*4芯数1-5护套材质聚氯乙烯电线大外径gb（mm）绝缘厚度gb（mm）标称截面6/4（mm2）用途电力电缆线芯材质裸铜线产品认证iso9001-2000电压等级中、低压电力电缆（35千伏及以下）绝缘材料塑料绝缘电力电缆

尊敬的客户朋友们：您们好！

由于铜价浮动较快，价格仅供参考，由此给您带来不便请谅解！

聚氯乙烯护套聚乙烯绝缘电力电缆

产品标准
standard
本产品按gb12706《额定电压35kv及以下铜芯、铝芯塑料绝缘电力电缆》标准生产，同时还可根据用户需要按国际电工委员会推荐标准iec、英国标准、德国标准及美国标准生产。
the product is manufactured according to the standard of gb12706 oriec , bs , din and icea upon request
适合范围
applications
本产品适用于额定电压35kv及以下配电网或工业装置中固定敷设之用。
the product is suitable for use in power distribution networks orfixed installations for industrial e with rated voltage upto and including 35kv.
使用特性operating characteristics
1、 ● 额定电压3.6/6kv~26/35kv交联聚乙烯绝缘电力电缆
xlpe insulated electrical cable for rated power frequency voltageuo/u:3.6/6kv~26/35kv.
● 电缆导体的允许长期高工作温度为90℃。
max.permissible continuous operating temperature ofconductor:90℃
● 短路时（长持续时间不超过5s）电缆导体的高温度不超过250℃。
max.short-circuit temperature of conductor shall not exceed250℃.(5s max. duration)
● 敷设电缆时环境温度应不低于0℃。
the bending radius of single-core cable shall not less than 20times of the cable diameter
the bending radius of three-cores cable shall not less than 15times of the cable diameter
2、 ● 额定电压0.6/1kv交联聚乙烯绝缘电力电缆
xlpe insulated electrical cable for rated power frequency voltageuo/u : 0.6/1kv
● 电缆导体的允许长期高工作温度为90℃。
max.permissible continuous operating temperature of conductor :90℃
● 短路时（长持续时间不超过5s）电缆导体的高温度不超过250 ℃
max.short-circuit temperature of the conductor shall not exceed 250℃
● 敷设电缆时环境温度应不低于0 ℃
the ambient temperature under installation shall not below 0 ℃
● 电缆弯曲半径不小于电缆外径15倍
the bending radius of a cable shall not less than 15 times of thecable diameter .
3、 ● 额定电压0.6/1kv聚氯乙烯绝缘电力电缆。
pvc insulated electrical cable for rated power frequency voltageuo/u : 0.6/1kv
● 电缆导体的允许长期高工作温度为70 ℃
max.permissible continuous operating temperature of conductor : 70℃
● 短路时（长持续时间不超过5s）电缆导体高温度不超过：160℃
max.short-circuit temperature of the conductor shall not exceed:160℃
● 敷设电缆时环境温度应不低于0 ℃
the ambient temperature under installation shall not below 0 ℃
● 电缆弯曲半径不小于电缆外径10倍