CONTEST电池|康迪斯蓄电池Co., Ltd

 contest充电电池|康迪斯电瓶co., ltd

 contest充电电池|康迪斯电瓶co., ltd

contest康迪斯电瓶商品特点 

1.容积范畴：100ah—3000ah； 

2.额定电压：2v、

3.设计方案长寿命：2v系列产品充电电池设计方案浮充使用寿命达十五年之上， 

4.锂电池寿命小：≤1%（每月）； 

5.密封性反映率：≥99%； 

6.结构紧凑，能量密度高； 

7.操作温度范畴宽：-15~45℃。 

contest康迪斯电瓶结构特点

极柱：选用子母板栅构造技术性； 

正极片：涂膏式正极片，高溫高低温4bs干固加工工艺； 

挡板：具备高吸咐、高可靠性的多微孔板极细玻纤挡板； 

充电电池罩壳：耐冲击、耐振动的高韧性abs(可采用阻燃性级)； 

接线端子密封性：选用双层极柱密封性特有技术性； 

阀门：谜宫式两层防爆型滤酸油路板构造； 

接线端子排：选用嵌铜芯圆接线端子总体设计。

contest康迪斯电瓶特性：

1、原始容积大，能量密度高选用新式合金铝板栅原材料技术性，可靠性设计的产品构造，容积比同行业高于5%，能量密度达35~38wh/kg。 

2、超低温使用性能选用独特的耐寒防腐剂原材料，充电电池可以在-15℃～40℃自然环境下一切正常应用。

3、组成一致性选用的和膏机器设备、极片分选择机器设备、充电电池动态性配组技术性，能合理提升 整组充电电池的一致性。

4、大功率充放电特性好正、负极板均选用涂膏式构造，紧机械加工工艺，内电阻小，大功率充放电特性好，具备的启动工作能力，30°陡坡上坡轻松自在。

5、可以信赖阀门能全自动打开，既能够排出来因为操作失误或免维护保养过电池充电造成 的不必要汽体，又能避免外界汽体或火苗进到充电电池內部造成锂电池寿命或发生爆炸。密封式防泄露构造：充电电池可倾斜、卧放应用，但不允许颠倒。

6、使用期长寿命长特异性物秘方，具备很强的耐深循环系统蓄电池充电工作能力，在25℃下，80%dod循环系统使用寿命达到600~700次；dod使用寿命循环系统达300~350次。

7、低碳环保充电电池以低碳环保为本，选用新式密封性构造可靠性设计，保证 应用全过程无漏酸及有机气体外溢状况，可以信赖。

8、免维护保养密封性反映率，充电电池在全部应用全过程中不用补水保湿或补酸维护保养。

contest康迪斯电瓶产品特性主要用途与归类：

免维护保养不必输液； upsups电源；

内电阻小，大电流量充放电特性好； 消防安全后备电源；

融入溫度广； 安全防范报警设备；

锂电池寿命小； 应急照明灯系统软件；

使用期长； 电力工程，邮电通信系统软件；

浓差极化原厂，方便使用； 电子器件仪表设备；

安全性防爆型； 气动工具,电动玩具车；

与众不同秘方，深充放电修复特性好； 携带式电子产品；

无分散锂电池电解液，侧倒仍能应用； 摄像器材；

商品根据ce,rohs验证,全部充电电池太阳能发电、风能发电系统软件；

battery installation of contest contex:

1. be sure to check whether the battery model, total number andelectrode connecting wire are consistent with the commonly usedmodels and specifications. if there is any error, please contactour company as soon as possible.

2. for special tools of metal materials such as torque wrenchand spanner, please use plastic tape to carry out the applicationof insulation layer after solving, so as to avoid short circuitfault, battery damage, fire and explosion.

3. when connecting, it is necessary to pay attention to theproper optical rotation, and tighten the anchor bolt to ensure goodcontact, but it is not necessary to use too much force to preventdamage to the wiring terminal and lead to liquid leakage.

4. it is not allowed to install rechargeable batteries ofdifferent manufacturers, volumes and characteristics together. thenew and old rechargeable batteries can not be used with each other;the interoperability of rechargeable batteries with different batchnumbers should be limited to one month; before application, theopen circuit voltage of rechargeable batteries must be checked. ifthe voltage of 12v battery is less than 12.40v, the voltage of 6vbattery is less than 6.20v or the voltage of 2v battery is lessthan 2.0v, the rechargeable battery should be charged first, andthe battery charging working voltage should refer to the balancedbattery charging mode.

5. before installing the end connector and connecting thecharging battery, check the total working voltage of the chargingbattery system software and the connection of positive and negativeelectrodes to ensure proper installation.

6. maintain the rechargeable battery to prevent obviousvibration or collision.

7. when installing on the machine and e, therechargeable battery should be used to eliminate the heating source(such as transformer). the rechargeable battery should be placed inthe area as low as possible. it is suggested to leave vent to keepgood natural ventilation.

8. rechargeable batteries are likely to cause flammable gases.when installing rechargeable batteries, it is necessary to put anend to machinery and e (such as power switch and commercialinsurance) that can cause fire.

9. when connecting the charging battery to the charging head orload, be sure to turn off the circuit switch, connect the positivelevel of the charging battery with the positive level of thecharging head or load, and connect the negative level of thecharging battery with the negative level of the charging head orload.