欧盟新标准EN IEC 60335-1:2023解读

欧盟家电安全新标准en iec 60335-1:2023于2023年12月22日正式出版，dop 发布日期是2024年11月22日， 该标准涵盖了zui新出现的许多家电产品的技术要求。

自国际电工委员会iec 60335-1:2020发布之后，欧盟相应的版本一直未发布，此次版本的更新，标志着iec 60335-1:2020正式在欧盟落地，相较于之前的版本有较大更新，有针对性的引入了zui新技术理念和产品测试要求。

en iec 60335-1:2023，en iec 60335-1:2023/a11:2023更新如下：

● 明确了pelv电路的要求；

clarified re for pelv circuits;

● 当输入功率和额定电流在整个工作周期中变化时，对测量的要求进行澄清;

clarification of re on measurement of power input and rated current when they vary throughout the operating cycle;

● 将规范性附件s替换为资料性附件“本标准适用指南关于基于10.1和10.2关于代表期的要求测量功率输入和电流;

replaced normative annex s with the informative annex s "guidance for the application of this standard on measurement of power input and current based on the re of 10.1 and 10.2 concerning the representative period";

● 针对带有一体式插脚在插座中的机械强度做相应的测试要求；

introduced and clarified mechanical strength re for appliances with integral pins for insertion into socket-outlets;

● 对电池供电器具的修订要求；

revised re for battery-operated appliances;

● 增加了对金属离子电池的要求，包括新的第12章节金属离子电池充电；

introduced re for metal-ion batteries including a new clause 12 charging of metal-ion batteries;

之前旧版此章节一直是空白，只是预留了章节编号，此次的更新加入金属离子电池要求，将影响深远，针对此类电池的测试要求也会相应的加严。

● 测试探针18的应用做了相应解释；

introduced the application of test probe 18;

● 定义了用户可接触的电器插座和插座的电器的要求；

introduced re for appliances incorporating appliance outlets and socket-outlets accessible to the user;

● 针对有功能接地装置的电器要求进行了修订和澄清；

revised and clarified re for appliances incorporating a functional earth;

● 介绍了具有第二数字ip额定值的装有自动线绳卷筒的器具的耐湿气测试要求；

introduced moisture resistance test re for appliances that incorporate an automatic cord reel and that have a second numeral ip rating;

● 针对器具和带有整针插入插座的器具零件的耐湿性的器具更新了测试标准；

clarified the appliance test criteria for the moisture resistance for appliances and parts of appliances with integral pins for insertion into socket-outlets;

● 对可接触selv端口或连接器或通用串行总线(usb)在非正常运行条件下的输出电压进行限制；

introduced limits on the output voltage of an accessible safety extra-low voltage outlet or connector or universal serial bus (usb) under abnormal operation conditions;

● 引入了光学辐射危害的要求；

introduced re to cover optical radiation hazards;

● 将外部通信软件管理条款引入规范性附件r中；

introduced external communication software management items into normative annex r;

● 修订了表r.1和表r.2中的外部通信要求；

revised external communication re in table r.1 and table r.2;

● 在新的规范附件u中引入网络安全要求，以避免未经授权的访问和通过公共网络通过远程通信的影响。

introduced in new normative annex u cyber security re to avoid unauthorized access and the effects of transmission via remote communication through public networks.