EN 15534-1塑料合成复合材料混合物及产品性能测试方法

en 15534-1塑料合成复合材料混合物及产品性能测试方法--测试标准

en 15534-1 composites made from cellulose-based materials and thermoplastics（usually called wood-polymer composites(wpc) or natural fibre composites(nfc)）   part 1 test methods for characterisation of compounds and products

en 15534-1 纤weiji和热塑性塑料合成复合材料（通常称为木塑复合材料或天然纤维复合材料） 第1部分：混合物及产品性能测试方法

en 15534-1塑料合成复合材料混合物及产品性能测试方法--检测项目及方法

en 15534-1 clause 6.1 appearance(applicable to products) 外观(适用于产品）

en iso 1183-1 method a(material) en 323(profile) density 密度

en 322 moisture content 含水率

cen/ts 15676 pendulum test

en 13451-1 annex e inclination plan test

en 13893 dynamic coefficient of friction

en 15534-1  clause 6.5 linear mass (applicable to profiles) 单位长度质量(适用于型材)

en 15534-1 clause 6.6.2 thickness width and length (applicable to profiles, only)厚度，宽度和长度 (只适用于型材)

en 15534-1 clause 6.6.3 deviation from straightness  (applicable to profiles)

en 15534-1 clause 6.6.4 cupping

en iso 179-1  method iso 179-1/1fu impact resistance(applicable to compounds) 抗冲击性

en 15534-1 clause 7.1.2.1 en 477 falling mass impact resistance落锤冲击

en 15534-1  clause 7.1.2.2 profile cladding

en iso 527-2 tensile properties（applicable to compounds）拉伸性能(只适用于原材料)

en iso 178 flexural properties (applicable to compounds) 弯曲性能

en 15534-1 annex a flexural properties (applicable to non-load bearing products)  弯曲性能

en 15534-1 clause 7.4.1 creep behaviour (known span in use)

en 15534-1 clause 7.4.2 unknown span in use(未指定实际使用跨距）

en 15534-1 clause 7.5 resistance to indentation 耐压痕性

en 13446 nail and screw withdrawal 握钉力   

en 1383 pull throuth resistance  锲入阻力

en 15534-1 clause 8.1.1 resistance to artificial weathering耐人工老化性(室外产品)

en 15534-1 clause 8.1.2 resistance to artificial weathering 耐人工老化性(室内产品)

en iso 811-7 method a or en 927-3 resistance to natural ageing耐自然老化性

en 15534-1 clause 8.3.1 and en 317 swelling and water absorption吸水率和吸水膨胀率

en 15534-1 clause 8.3.2 and en 321 moisture resistance (cycle conditions) 耐水性(循环条件)

en 15534-1 clause 8.3.3 moisture resistance (boiling test)耐水性(沸水试验)

en 15534-1 clause 8.4 resistance against termites抗白蚁性

en 15534-1 clause 8.5.2 and env 12038 resistance against basidiomycetes耐担子菌性

en 15534-1 clause 8.5.3 and cen/ts 15083-2 resistance against soft rotting mico-fugi  耐软朽木微生菌

astm d3273 resistance against discolouring micro-fugi耐真菌污染

iso 16869 resistance against discolouring micro-fugi 耐真菌污染

en 15458 resistance against discolouring algae耐藻类污染

en iso 9227 neutral salt spray resistance to salt spray耐盐雾性

en iso 75-1 and en iso 75-2 method a 1.80mpa heat deflection temperatur (hdt) 热变形温度

iso 11359-2 -20℃~80℃ linear thermal expansion线性热膨胀系数

en 479 heat reverison热恢复性   

en 15534-1 clause 9.4 heat build-up  生热测试

en iso 4589-2 oxygen index极限氧指数

en iso 11925-2 single flame source test小火源测试

en 13823 single buring item test (applicable to cladding only)单体燃烧测试(适用于覆盖层)

en iso 9239-1 radiant heat source test (floorings)辐射热源法(铺地材料)   

en 15534-1 clause 10.1 and en iso 4628-6 degree of chalking (for coated products, only) 粉化程度

en iso 2813 change of gloss光泽度变化

en 15534-1 clause 10.3 peel strength(applicable to profiles with laminated foil)  剥离强度