流水槽模具 水泥流水槽模具难脱模问题的解决

流水槽模具 水泥流水槽模具难脱模问题的解决

1流水槽模具的难脱模问题的解决

）浇筑：施工时混凝土的配比要适中，浇筑时用力要均，不能将混凝土外漏。

1) pouring: the proportioning of the concrete must be moderate during construction, and the strength must be uniform when pouring, so the concrete can not be leaked out.

2）震动：振动棒在震动过程中用力需均匀，适当即可。

2) vibration: the vibrating bar should be evenly distributed in the course of vibration.

3）拆模：流水槽模具拆模是重中之重，首先是流水槽模具上面的螺丝要定期加润滑油，以免螺丝生锈。拆模的时候一定要小心一些，尽量避免发生流水槽模具变形的事情发生，影响到下次的使用。还有一点要注意的就是注意脱模力度，不要损坏已经凝固好的成品。

3) dismantling: water groove mold removal is the top priority. first of all, the screws on the water trough mold should be lubricated regularly to avoid rusting screws. we must be careful when removing the mould, try to avoid the occurrence of the deformation of the water trough mold, and affect the next use. another point to note is to pay attention to the release strength, do not damage the finished product.

保定市玉达模具制造有限公司，位于北京、天津、石家庄三角地带，交通方便，我厂自建厂以来专业打造防撞墙模具，防护栏模具，化粪池模具，检查井模具，隔离墩模具，化粪池模具，电缆槽模具，穿线槽模具，流水槽模具，u型槽模具，排水沟模具等等。生产的产品销往内蒙、山西、陕西、甘肃 、新疆、青海、宁夏、山东、安徽、东北、湖南、湖北、四川、浙江、江苏、云南、广东、福建、海南、唐山、天津、北京、保定等地，部分模具出口海外，受到全国各地客户的好评。期待来电咨询：

baoding yuda mould manufacturing co., ltd. is located in beijing, tianjin, shijiazhuang triangle area, convenient transportation. since its establishment, our factory has specialized in building anti-collision wall mould, fence mould, septic tank mould, inspection well mould, isolation pier mould, septic tank mould, cable groove mould, threading groove mould, flow trough mould, u-shaped trough mould, drainage ditch mould and so on. the products are sold to inner mongolia, shanxi, shaanxi, gansu, xinjiang, , ningxia, shandong, anhui, northeast, hunan, hubei, sichuan, zhejiang, jiangsu, yunnan, guangdong, fujian, hainan, tangshan, tianjin, beijing, baoding and other places. some of the moulds are exported overseas and are well received by customers all over the country. looking forward to calling: