【Shell Tellus TX32； 壳牌 Tellus

深圳市吉顺达润滑油  0755-23092526  

壳牌润滑油系列 > 液压油 > shell tellus tx15/tx32/tx46/tx68 shell tellus tx15/tx32/tx46/tx68　详细说明　 shell tellus oils tx 
multigrade hydraulic oils 
shell tellus oils tx are advanced performance, anti-wear, hydraulic oils designed for 
applications subject to a wide range of temperatures or where small variations in 
viscosity with temperature are re 
they are based on a blend of specially selected high viscosity index base oils and 
additive technology unique to shell. special 'viscosity index' improvers guarantee 
excellent shear-stable 'stay-in-grade' properties. 
applications 
z hydraulic and fluid power transmission 
systems subjected to wide variations in 
temperature or where low viscosity 
change with fluctuating temperature is 
re 
 certain critical hydraulic systems can only 
tolerate small variations in viscosity with 
fluctuating temperature if efficiency and 
responsiveness are to be maintained. shell 
tellus oils tx are specially built to cater for 
these conditions. 
performance features 
z very low viscosity variation with 
temperature
advanced viscosity index technology 
minimises the oil's variation in viscosity 
with changes in temperature and provides 
good pumpability at low temperatures. 
z high shear stability
 the 'vi' improver is highly resistant to 
mechanical stress. the maintenance of 
'stay-in-grade' characteristics ensures 
effective lubrication and long oil life. 
z outstanding anti-wear performance 
 proven anti-wear additives are effective in 
all operating conditions, including low and 
severe duty, high load situations. 
z excellent filterability 
 minimal tendency to cause filter blockage 
in the presence of contaminants such as 
water and calcium. 
z oxidation resistant
 resist the formation of acidic products 
and sludge, even at high working 
temperatures.
z corrosion protection 
 long term protection against corrosion of 
both ferrous and non-ferrous metals.
z rapid air release and anti-foam 
properties 
 quick air release without excessive 
foaming. 
performance level 
 shell tellus oils tx have been tested and 
approved to exceed the following industry 
re:
vickers m-2950-s (mobile systems) 
 i-286-s (industrial systems) 
din 51 524 (part 3) 
compatibility
the anti-wear additive technology used in shell 
tellus oils tx is based upon zinc which, 
although ideal for most hydraulic pumps, 
should not be used in those of older design 
containing silver-plated components. shell 
tellus oils s or r, depending on the severity 
of duty, should be used for these applications. 
seal & paint compatibility 
shell tellus oils tx are compatible with all 
seal materials and paints normally specified for 
use with mineral oils. 
health & safety
shell tellus oils tx are unlikely to present any 
significant health or safety hazard when 
properly used in the recommended application, 
and good standards of industrial and personal 
hygiene are maintained. 
avoid contact with skin. use impervious 
gloves with used oil. after skin contact, wash 
immediately with soap and water. 
for further guidance on product health & 
safety refer to the appropriate shell product 
safety data sheet 
protect the environment
take used oil to an authorised collection point. 
do not discharge into drains, soil or water.