集装箱/托盘运输车CE知识分享- EN 12312-10:2005+A1:2009

1、集装箱/托盘运输车欧盟ce知识分享指令

md机械指令：2006/42/ec

2、集装箱/托盘运输车欧盟ce知识分享标准：

en iso 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

en 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

en 12312-10:2005+a1:2009 aircraft ground support e - specific re - part 10: container/pallet transfer transporters飞机地面支持设备.特殊要求.第10部分：集装箱/托盘运输车

3、en 12312-10:2005+a1:2009适用范围：

this european standard specifies the technical re to minimise the hazards listed in clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or his authorised representative. it also takes into account some performance re recognised as essential by authorities, aircraft and ground support e (gse) manufacturers as well as airlines and handling agencies. this european standard applies to self-propelled container/pallet transfer transporters, with a seated driver. examples of typical transfer transporters are shown in annex a. this european standard does not apply to: loading e with a height adjustment capability in excess of 150 mm; transporter-loaders (single platform loader with transporter capability, see en 12312-9); roller-bed transport platforms mounted on unmodified commercial road chassis. this european standard does not establish re for noise and vibration. noise and vibration are dealt with respectively in en 1915-4 and en 1915-3. this european standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. this part of en 12312 is not applicable to gse which are manufactured before the date of publication by cen of this european standard. note certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system. this part of en 12312 is intended to be used in conjunction with en 1915-1, en 1915-2, en 1915-3 (for vehicles) and en 1915-4.提醒您，本欧洲标准规定了在按照制造商或其授权代表给出的规范进行集装箱/托盘转运运输车的调试、操作和维护过程中，将第4条所列危险降至低的技术要求。它还考虑了当局、飞机和地面支持设备（gse）制造商以及航空公司和处理机构认为至关重要的一些性能要求。本欧洲标准适用于带座椅驾驶员的自推进式集装箱/托盘运输车。附件a中显示了典型的转运运输车示例。本欧洲标准不适用于：高度调节能力超过150 mm的装载设备；运输装载机（具有运输能力的单平台装载机，见en 12312-9）；安装在未经修改的商业道路底盘上的辊道式运输平台。本欧洲标准未规定噪声和振动要求。噪声和振动分别在en 1915-4和en 1915-3中进行了处理。本欧洲标准不涉及标准汽车底盘和停机坪交通的危险。en 12312的本部分不适用于在cen发布本欧洲标准之前制造的gse。注：由于待处理的集装箱/托盘主要基于英制，因此公制计量后的某些计量单位为英制单位（括号内）。en 12312的本部分旨在与en 1915-1、en 1915-2、en 1915-3（车辆）和en 1915-4结合使用。

4、en 12312-10:2005+a1:2009 欧盟ce知识分享测试、检查项目